News information

Benz Diagnostic Software for X-431 Series V47.20
元征软件 2014-11-11

        'Compared with the previous version:
        up''||''&''||''#100;ates as following:
        1. Optimized the functions of Read Version Information, Read DTCs, Clear DTCs, and Data Streams for the AIRMATIC system under the chassis 166M/231.
        2. Optimized the functions of Read Version Information, Read DTCs, Clear DTCs, and Data Streams for the ESA-FL and ESA-FR systems under the chassis 215/220/230.
        3. Added the Actuation Test function for the FSCU system under 166ML/166GL/176/231/246.
        4. Added the Actuation Test function for the SAM system under 166ML.
        5. Added the Actuation Test function and the following special functions for the AIRMATIC system under the chassis 231:
        1) Resetting of calibration values
        2) Level calibration
        3) Vehicle load condition comparison
        4) Calibration of component ''''B24/12(ABC lateral acceleration sensor)''''
        6. Added the Actuation Test function and the following special functions for the AIRMATIC system under the chassis 166ML:
        5) Level calibration
        6) Reset of compressor operatin time
        7. Added the Actuation Test function and the following special functions for the ISM system under the chassis 166ML/231:
        7) Calibrate control unit ''''A80(Intelligent servo module for DIRECT sel''||''&''||''#101;ct)''''
        8) Teach-in of drive authorization system
        9) Variant coding reset
        8. Added the Actuation Test function and the following special functions for the CDID3 system under the chassis 166ML:
        10) Teach-in of throttle valve stop
        11) Teach-in of intake port shutoff
        12) Teach-in diesel particulate filter after replacement of control unit ''''N3/9(CDI control unit)''''
        13) Reset of lambda values
        14) Reset of contamination level of air filter
        15) Teach in component ''''Y77/1(Boost pressure positioner)''''
        16) Quick teach-in of values of zero quantity calibration
        17) Teach-in process after replacement of component ''''Diesel particulate filter''''
        18) Oxidation catalytic converter
        19) Activation of fuel pump
        20) Bleeding of high-pressure fuel circuit
        21) B79/2(Transmission neutral position sensor)
        22) Resetting of learned values of component ''''B6/1(Camshaft Hall sensor)''''
        9. Added the Actuation Test function and the following special functions for the VGSNAG2 system under the chassis 166ML:
        23) Display of coding data
        24) Display of SCN
        25) Display of CVN
        26) Display of adaptation values (Shift)
        27) Resetting the adaptation values

        10. Added the Actuation Test function and the following special functions for the ESP system under the chassis 166ML:
        28) Calibration of component ''''A7/3(Traction system hydraulic unit)''''
        29) Calibration of component ''''B24/15(Yaw rate sensor for lateral and longitudinal acceleration)''''
        11. Added the Actuation Test function and the following special function for the TC166 system under the chassis 166ML:
        30) Calibration of component ''''N15/7(Transfer case control module)''''
        12. Added the Actuation Test function and the following special function for the ARS system under the chassis 166ML/166GL:
        31) Teach-in of sensors
        13. Added the Actuation Test function and the following special function for the TPM system under the chassis 166ML/166GL/176/231/246:
        32) Write identification numbers of tire pressure sensors
        14. Added the Actuation Test function and the following special function for the ESP system under the chassis 231/246:
        33) Calibration of component ''''Acceleration sensor''''
        15. Optimized functions of Read Version Information, Read DTCs, Clear DTCs, Data Streams, Actuation Test, and special functions for the SAM_REAR, ESA_DR, and ESA_PASS systems under chassis 212/207/X204/218/197/172.
        16. Optimized the functions of Read Version Information, Read DTCs, Clear DTCs, Data Streams, Actuation Test, and special functions for the AAC/SAM_REAR/SAM_DR/SUSPENSION/AB systems under the chassis 204.
        17. Optimized the functions of Read Version Information, Read DTCs, Clear DTCs, Data Streams, Actuation Test, and special functions for the AB system under the chassis 210.
        18. Optimized the functions of Read Version Information, Read DTCs, Clear DTCs, and Data Streams for the DTR system under chassis 212/207/218/172.
        19. Optimized the functions of Read Version Information, Read DTCs, Clear DTCs, Data Streams, Actuation Test, and special functions for the ME97AMG-156 system under the chassis 212/204.
        20. Optimized the functions of Read Version Information, Read DTCs, Clear DTCs, Data Streams, Actuation Test, and special functions for the ME97AMG-159 system under the chassis 197.
        21. Optimized the functions of Read Version Information, Read DTCs, Clear DTCs, Data Streams, Actuation Test, and special functions for engine ME97 6-cylinder/8-cylinder system under 221/216/164/171/X164/211/209/203/251/219/230/463(As of 03/2007).
        Optimized the functions of Read Version Information, Read DTCs, Clear DTCs, Data Streams, Actuation Test, and special functions for the ME97AMG system under the chassis 209/216/219/251/211/221/164/204.
        Support products：
        X431-GDS I、X431-GDS II、X431-3G II、X431-3G III、X431 IV、X-431 V、X-431 V+、Diagun III、X431 Pad、Matco PAD、X431 PAD II、X431 Pro、X431 PRO3、X431 iDiag、EasyDiag、ScanPad071、ScanPad101、MaxGo、Maximus2.0、CRP229、X431-Diagun、X431-Master/GX3、新X431-Tool、新X431-AutoBook、X431、X431-Tool、X431-AutoBook、X431-QuiCheck、Iso D、X431-Solo、X431-Nano、X431-EuroPro
        '

Hotline：400-066-6666