News information

BMW Diagnostic Software for X-431 Series V47.60
元征软件 2014-07-01

        'Compared with the previous version:
        up''||''&''||''#100;ates as following:
        1. Added the following special functions for the EGS (Electronic Automatic Transmission) under E46, E53, E39: Oil level detection, Adapt transmission fully, Venting transmission actuator, Teach in characteristic clutch-valve values, Adapt clutch slipping, Venting clutch slave cylinder, Offset sensor, longitudinal acceleration, Calculate accumulator prepressurizing pressure, Disengage gear, Engage any gear
        2. Added the following special functions for the DSC (Dynamic Stability Control) system under E46, E53, and E39: Lateral accelartion sensor, Pressure sensor, Brake pipe connection, Speed sensor connection, Venting, Final check on ABS, Bleeding, ABS hydraulic modulator, Rate of rotation sensor, Steering angle sensor, DSC hydraulic system bleeding, Brake pipe mixed check
        3. Added the following special functions for the EHC (Electronic Height Control) under E46, E53, and E39: Vehicle height sensor check, Emptying pressure accumulator, Protective deactivation, Fault lamp on sporadically, Transport mode, Check actuators, Line mode, Check solenoid valve, Check compressor relay, Check air supply system
        4. Added the following special functions for the ZKE (Central Computer System) under E46, E53, and E39: Service action, general module 5, Set/del''||''&''||''#101;te opening limitation, Log remote control key on/off
        5. Added the following special function for the IHKA (Integrated Automatic Heating/ A/C Control) under E46, E53, and E39: Deactivate transport-lock function
        6. Added the following special function for the STH (Stationary Heater) under E46, E53, and E39: Reset malfunction lock
        7. Added the following special function for the NAV (Navigation System) under E46, E53, and E39: DVD lock
        8. Added the following special functions for the BIT (Basis Interface Telephone) under E46, E53, and E39: Handset log-on/off, Change emergency number, Re-enabling BMW assist
        9. Added the following special function for the AIC (Automatic Interval Control) system under E46, E53, and E39: Rain sensor initialization
        10. Added the following special function for the CAS (Car Access System) under F15: BDC-KL 15 activation/deactivation
        11. Added functions of Read Version Information, Read DTCs, Clear DTCs, Data Streams, and Actuation Test for the GWS (Gear sel''||''&''||''#101;ctor Switch), DME/DDE (Digital Motor Electronics/Digital Diesel Electronics), DSC (Dynamic Stability Control), EPS (Electronic Power Steering), FZD (Sunroof Function Center), MMI/CD (Control Display), PDC (Park Distance Control), KLIMA2/FKA (Rear heater/air conditioning) systems under F15, F20, F30, and F25.
        12. Added the following functions for the EMF (Parking Brake) under X series E71: Workshop mode, Trial running, Performing running-in brake program
        13. Added the coding function for the CAS (Car Access System), DME/DDE (Digital Motor Electronics/Digital Diesel Electronics), ABG (Airbag), EGS (Electronic Automatic Transmission), EHC (Vehicle Height Control), EKPS (Electonic Fuel Pump), EMF (Parking Brake), FLA (Main-beam Assistant), FRM (Footwell Module), JBBF (Connection Box Electronic), IHKA (Integrated Automatic Heating/ A/C Control) under X series E70.
        14. Added the coding function for the GR (Cruise Control) system under E46.
        15. Added the coding function for the DME/DDE (Digital Motor Electronics/Digital Diesel Electronics), ASK (Audio System Controller), CD (Control Display), and TCU (Telematic Control unit) under E60.
        16. Added the coding function for the RIP system under R50.
        17. Added the one-key DTC clearing function.
        18. Optimized the text libraries in Spanish.
        19. Optimized the window initialization function for the SGM-ZGM (Safety and Gateway Module (ZGM)) and FRM (Footwell Module).
        Optimized the intercoolant correction function of the CBS.
        Support products：
        X-431,X-431 TOOL,X-431 GX3,X-431 Diagun,X-431 Solo,X-431 Nano,X-431 EuroPro, X-431 NCP,X-431 QuiCheck,X-431 ISO D, X-431 3G II,X-431 GDS I, X-431 3G III, X-431 GDS II,X-431 TOOL,X-431 AUTOBOOK,X-431 IV, X-431 Diagun III, X-431 Pad, X-431 Matco PAD，X-431 Pro, X431 iDiag, EasyDiag，X-431 V，X-431 V+，X431 PADII，ScanPad071，ScanPad101，X431 PRO3, AutoLaunch, MaxGo, Maximus 2.0, CRP229'

Hotline：400-066-6666