NISSAN Diagnostic Software for X-431 Series V41.62
元征软件
2013-08-23
'Compared with the previous version: Compared with the V41.61, 1. For the manual menu mode of INFINITI EX35 2009 model of Japanese region, the AIR PRESSURE MONITOR system has been added. 2. The feedback information of NISSAN ID has been revised, and the scanned diagnostic ID will be displayed. 3. The negative response (0x7f) and no response for the unsupported Data streams have been revised. 4. For NISSAN/SKYLINE/2006, the unit spelling mistake of engine speed Data stream has been revised. 5. For BCM system, the Data stream MULTI REMOTEENT has been changed as MULTI REMOTE ENTER. 6. For NISSAN specialized protocol, the testing time for dynamic balancing function has been revised as 40S per cylinder. And the speed algorithm for single-cylinder misfire has been revised. 7. For the Version information of ECM_KWP_7A_1, the problem that the device does not respond has been revised. 8. For 4WD_KWP_22_3 system, the display problem for the last DTC only with a code has been revised. 9. The DTC P0563 has been revised as System Voltage. 10. For USM_CAN_E9A0_2 system, the problem that the Data stream which meets the existing conditions does not displayed has been revised. 11. For HVC_CAN_E880_1 system, the Data stream LOAD FAIL algorithm has been revised. 12. For TIC_KWP_74_1 system, the algorithm control byte for all data streams has been revised. 13. The diagnostic software and the DTC library of MYCAR have been optimized, and the DTCs with spelling mistakes have been revised. 14. The EasyDiag product is newly released. '
