|
|
Benz Diagnostic Software for X-431 Series V46.60
元征软件
2013-12-27
|
'Compared with previous version:
up''||''&''||''#100;ates as following:
1. For the EIS system under the W204/251/164/X164/203/463/209/169/245 chassis, the Special Functions have been added.
Special Functions:
(1) All codes
(2) Set status CAN bus
(3) Activate control module N26/5 (Electric steering lock control module)
(4) Activate control module N73 (EIS ''||''&''||''#091;EZS''||''&''||''#093; control unit)
(5) Write of the VIN
2. For the DCMFL system under the 216/221 chassis, the Actuation Test function has been added for newly-added diagnostic IDs.
3. For the DCMFR system under the 216/221 chassis, the Actuation Test function has been added for newly-added diagnostic IDs.
Special Functions:
(1) Front right power window
(2) Exterior rearview mirrors
(3) Closing system
(4) Lamps
(5) Deceleration time-Additional turn signal light in exterior mirror
4. For the DCMRL system under the 221 chassis, the Actuation Test function has been added for newly-added diagnostic IDs.
Special Functions:
(1) Rear left power window
(2) Closing system
(3) Lamps
5. For the DCMRR system under the 221 chassis, the Actuation Test function has been added for newly-added diagnostic IDs.
Special Functions:
(1) Rear right power window
(2) Closing system
(3) Lamps
6. For the PSD system under the 221 chassis, the Actuation Test and the Special Functions have been added for newly-added diagnostic IDs.
Special Functions:
(1) Panoramic sliding roof
(2) Front roller sun blind/Rear roller sun blind
(3) Closing the panoramic sliding sunroof during rain
(4) Automatic opening and closing of panoramic sliding sunroof
(5) Teach-in process for anti-pinch protection function of panoramic sliding sunroof/Roller sun blind
7. For the XALWA_L system under the 221 chassis, the Read Version Information, Read DTCs, Clear DTCs, and Read Data Streams functions have been added for newly-added diagnostic IDs.
8. For the XALWA_R system under the 221 chassis, the Read Version Information, Read DTCs, Clear DTCs, and Read Data Streams functions have been added for newly-added diagnostic IDs.
9. For the WSS system under the 221 chassis, the Read Version Information, Read DTCs, Clear DTCs, and Read Data Streams functions have been added for newly-added diagnostic IDs.
10. For the SAM REAR system under the 221 chassis, the Actuation Test and the Special Functions have been added for newly-added diagnostic IDs.
Special Functions:
(1) Read coding and change if necessary
11. For the SAM REAR system under the 463 chassis, the Actuation Test function has been added for newly-added diagnostic IDs.
12. For the SAM DR system under the 221 chassis, the Actuation Test function has been added for newly-added diagnostic IDs.
13. For the SAM FRONT system under the 164/169/245 chassis, the Actuation Test function has been added for newly-added diagnostic IDs.
14. For the OCP system under the 240 chassis, the Actuation Test function has been added for newly-added diagnostic IDs.
15. For the REVETR-LF system under the 204/220/164/251/211/219/221 chassis, the Actuation Test and the Special Functions have been added.
Special Functions:
(1) Read coding and change if necessary
(2) Carry out control unit reset
16. For the AAG system under the 221 chassis, the Actuation Test has been added for newly-added diagnostic IDs.
17. For the RVC system under the 209/230 chassis, the Actuation Test and the Special Functions have been added.
Special Functions:
(1) Read coding and change if necessary
(2) Normalizing of trunk lid remote closing
(3) Normalizing of left rear power window
(4) Normalizing of right rear power window'
|
|
|
|
|
Copyright©2012:SHENZHEN LAUNCH SOFTWARE DEVELOPMENT CO., LTD. All rights reserved.
Hotline:400-066-6666
|
|
|